Completion Environmental Acceptance

In accordance with the requirements of relevant laws and regulations of the state and the city, and in accordance with the environmental impact assessment documents and approval decisions, we will help enterprises carry out self-examination and independently carry out environmental protection acceptance services for construction, supporting environmental protection facilities and the implementation of environmental protection procedures. Receiving and inspection work mainly includes acceptance and inspection monitoring and follow-up, in which acceptance and inspection monitoring can be divided into five stages: initiation, self-inspection, preparation of acceptance and inspection monitoring programs, implementation of monitoring and inspection, and preparation of acceptance and inspection monitoring reports.

According to Article 17 of the Regulations on the Administration of Environmental Protection in Construction Projects, after the completion of a construction project that compiles an environmental impact report and report form, the construction unit shall, in accordance with the standards and procedures stipulated by the competent administrative department of environmental protection under the State Council, check and accept the supporting environmental protection facilities and compile an acceptance report.The new management regulations abolish administrative examination and approval, refine the self-acceptance procedure, and transform the responsible subject to the construction unit of specific projects, further strengthening the "three simultaneous" main responsibility of the construction unit for environmental protection. At the same time, the administrative regulations require enterprises to take the initiative to disclose information before the start of construction projects, information during construction, production information, environmental protection implementation and other information after the event. NOA As a third-party comprehensive testing institution, NOA can provide technical support and services at different stages of completion and environmental acceptance; provide monitoring and issue data reports for the socially entrusted "three simultaneous" completion acceptance.

Service Content

1. NOA services

Project category	Work service content
Completion Environmental Acceptance	Assist enterprises in collecting and compiling acceptance application materials: Assist enterprises in preparing the materials needed for acceptance in accordance with the requirements of the Administrative Measures for Environmental Protection Acceptance for the Completion of Construction Projects and other relevant documents.
	Guide the construction and improvement of on-site environmental protection facilities: Complete the rectification of problems according to the latest national and local environmental protection [requirements and the actual situation of the enterprise site.
	Prepare an acceptance monitoring plan and organize its implementation: NOA technical service team will prepare an acceptance monitoring plan according to the enterprise environmental assessment information and on-site conditions, and organize the testing team to complete the testing work and issue effective test reports.
	Assist the client to complete the preparation of the completion acceptance report and the disclosure of relevant information: According to the on-sitte acceptance situation and acceptance monitoring data, NOA technical team will provide professional technical services, complete the acceptance report and assist the enterprise to complete the disclosure of relevant information.

2.NOA advantages.

1. The acceptance team is experienced and numerous;
2. One-stop service for laboratory analysis + report preparation.

3. Classic cases

Serial number	Customer industry	NOA
1	A construction laboratory	Report preparation + environmental monitoring

Service Process

Q&A

Does the total accounting of unorganized emissions need to be accounted (relevant in the EIA)?

Because it is impossible to actually test the amount of unorganized emissions, the data can only be obtained by model calculation. According to the current situation, only the calculation model of the total unorganized emissions is given in the technical specifications for the issuance of pollutant discharge permits in the iron and steel industry. Other industries and the General Provisions on the Technical Specifications for the Application and Issuance of Sewage Permits (HJ942-2018) stipulate that unorganized emissions only allow concentration limits, not emission limits.

What are the key points for compiling opinions on independent acceptance by enterprises?

The key point is the acceptance conclusion. Compared with the following nine articles, list the specific non-conforming items. ( 1) Environmental protection facilities have not been fully implemented as required; (2) Pollutant emission monitoring results exceed the standard; (3) Major changes have not been completed; (4) Major environmental pollution has not been fully treated during the construction process; (5) Construction projects included in the management of pollutant discharged pollutant discharged without a license or without a certificate; (6) Phased construction and put into production, and their ability to prevent pollution and ecological damage of environmental protection facilities cannot meet the needs; (7) Those who have been punished for violating the law and require corrections have not been completed; (8) The acceptance report has major defects; (9) Other environmental protection laws and regulations shall not pass the acceptance of environmental protection. If it is unqualified, the problems existing in the project should be clarified, and follow-up rectification matters with specific content, clear requirements, technical feasibility and operationality should be put forward.

What is the main basis for the acceptance of environmental protection after the completion of the construction project?

(1) Laws, regulations, standards and normative documents related to environmental protection of construction projects;
(2) Technical specifications for environmental protection acceptance after the completion of construction projects;
(3) The environmental impact report (form) of the construction project and the approval decision of the examination and approval department.

Our Advantage

Authoritative Qualification

NOA has been approved by Certification and Accreditation Administration of the People’s Republic of China（CNCA）(CNCA-R-2002-051), and has obtained qualification of China Inspection Body and Laboratory Mandatory Approval (CMA),and has passed the multiple approvals of China National Accreditation Service for Conformity Assessment (CNAS), International Accreditation Service (IAS), United Kingdom Accreditation Service (UKAS), Joint Accreditation System of Australia and New Zealand (JAS-ANZ). NOA has been approved by State Administration for Market Regulation of China, and has been recognized as inspection and testing institution of China's special equipment, as well as the qualification of China's national equipment supervision and engineering supervision. NOA-DCI is the notified body of the CE directive of the European Commission. NOA has been recognized by the International Electrotechnical Commission (IECQ) by obtaining Electronic Component Quality Assessment System. It is also a national inspection and assessment notified body of import and export commodity in China.NOA is a high-tech enterprise in Shanghai.

Improve Performance, Realize Asset Value Appreciation, and Service Throughout the Entire Value Chain

From pre-design to post-operation, NOA has the ability to guarantee the whole life cycle of the business. NOA, as an independent third-party inspection company, has a large number of domestic and international standards and specifications proficient in design, welding, non-destructive testing, painting, packaging and other fields The experienced team of professional engineers and inspection experts, with more than ten years of experience in the domestic market, is familiar with all aspects of the domestic industrial equipment supply chain, and can provide you with technical support services for the full life cycle of technical services in a timely manner, combining various products. Inspection, certification, testing, consulting, and auditing services can provide you with one-stop all-round comprehensive services.

Quality, Efficiency and Service

NOA has formed a mature and solid operation system in the development of more than 20 years. We let technical experts who are familiar with market regulations and testing standards and have professional industry experience to carry out inspection, evaluation and design review work. While meeting the requirements of domestic and international standards, we ensure that customers can obtain satisfactory service results in the first time with accurate time-sensitive management methods, and ensure that customers can seize the opportunity in the market competition.

Service Area

NOA inspection services currently cover Europe, Australia, Russia, some Middle East regions and most regions in China. NOA can ensure the consistency and continuity of customer service in different regions, and eliminate the impact of unfamiliar environments on customer quality. The guarantees and the impact of project implementation enable customers to participate in different markets across the country or around the world with flawless quality.